Xerox PHASER 7500 Service Manual

8-58 Phaser 7500 Printer Service Manual
Service Parts Disassembly
REP 6.2 IBT Belt Unit/ Front Lock Bracket/ Rear Lock Bracket/ Tension
Lever
PL6.1.1/ PL6.1.2/ PL6.1.3/ PL6.1.10
Caution
Do not expose the Imaging Unit to light for more than 5 minutes. Cover the
Imaging Unit to avoid damage. Do not touch the surface of the Imaging Unit.
Do not touch the IBT Belt surface.
1. Remove the Imaging Unit (Y/M/C/K) (REP 1.2, page 8-10).
2. Remove the IBT Belt Cleaner Assembly (REP 6.1, page 8-57).
3. Remove the KL Clip that secures the Rear Strap at the rear, and remove the
Rear Strap from the L/H Cover Assembly.
4. Use a needle-nose plier to turn the Left Hand Door Support strap at the front
counterclockwise by 90° and pull it towards you. Turn it back at the inner
stopper position, then incline the L/H Cover Assembly horizontally until it
stops.
s7500-110

Xerox PHASER 7500 Specifications

General

Brand	Xerox
Model	PHASER 7500
Category	Printer
Language	English