Suzuki GSF1250 Service Manual

2B-11 Front Suspension:
Special Tools and Equipment
Recommended Service Material
B718H12208001
NOTE
Required service material is also described in the following.
“Front Fork Components (Page 2B-1)”
Special Tool
B718H12208002
Material SUZUKI recommended product or Specification Note
Oil SUZUKI FORK OIL SS-08 or
equivalent
P/No.: 99000–99001–
SS8
)(Page 2B-6) / )(Page 2B-
6) / )(Page 2B-7) /
)(Page 2B-9)
Thread lock cement THREAD LOCK CEMENT SUPER
1322 or equivalent
P/No.: 99000–32110 )(Page 2B-7)
09940–52841 09940–52861
Inner rod holder Front fork oil seal installer
)(Page 2B-7) / )(Page 2B-
8)
)(Page 2B-6)
09943–74111
Fork oil level gauge
)(Page 2B-8)

Suzuki GSF1250 Specifications

General

Displacement	1255 cc
Bore x Stroke	79.0 mm x 64.0 mm
Compression Ratio	10.5:1
Fuel System	Fuel injection
Transmission	6-speed, constant mesh
Front Suspension	Telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Front Tire	120/70ZR17M/C (58W), tubeless
Rear Tire	180/55ZR17M/C (73W), tubeless
Overall Length	2130 mm
Overall Width	790 mm
Seat Height	805 mm
Wheelbase	1485 mm
Fuel Tank Capacity	19.0 L
Starter	Electric
Final Drive	Chain
Ignition	Electronic ignition (transistorized)
Engine Type	4-stroke, liquid-cooled, DOHC
Ground Clearance	135 mm