Suzuki GSF1250 Service Manual

Drive Chain / Drive Train / Drive Shaft: 3A-11
Special Tools and Equipment
Recommended Service Material
B718H13108001
NOTE
Required service material is also described in the following.
“Drive Chain Related Components (Page 3A-1)”
Special Tool
B718H13108002
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE A or
equivalent
P/No.: 99000–25010 )(Page 3A-3) / )(Page 3A-
4) / )(Page 3A-6) /
)(Page 3A-6)
Thread lock cement Thread Lock Cement Super 1303 or
equivalent
P/No.: 99000–32030 )(Page 3A-3)
09913–50121 09913–70210
Oil seal remover Bearing installer set
)(Page 3A-6) )(Page 3A-6) / )(Page 3A-
6)
09922–22711
Drive chain cutting and
joining tool
)(Page 3A-7)

Suzuki GSF1250 Specifications

General

Displacement	1255 cc
Bore x Stroke	79.0 mm x 64.0 mm
Compression Ratio	10.5:1
Fuel System	Fuel injection
Transmission	6-speed, constant mesh
Front Suspension	Telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Front Tire	120/70ZR17M/C (58W), tubeless
Rear Tire	180/55ZR17M/C (73W), tubeless
Overall Length	2130 mm
Overall Width	790 mm
Seat Height	805 mm
Wheelbase	1485 mm
Fuel Tank Capacity	19.0 L
Starter	Electric
Final Drive	Chain
Ignition	Electronic ignition (transistorized)
Engine Type	4-stroke, liquid-cooled, DOHC
Ground Clearance	135 mm