Suzuki GSF1250 Service Manual

Brake Control System and Diagnosis: 4A-22
Special Tools and Equipment
Recommended Service Material
B718H14108001
NOTE
Required service material is also described in the following.
“Front Brake Master Cylinder Components (Page 4A-14)”
“Rear Brake Master Cylinder Components (Page 4A-18)”
Special Tool
B718H14108002
Material SUZUKI recommended product or Specification Note
Brake fluid DOT 4 — )(Page 4A-10) /
)(Page 4A-11) /
)(Page 4A-16) /
)(Page 4A-20)
Grease SUZUKI Silicone Grease or
equivalent
P/No.: 99000–25100 )(Page 4A-17) /
)(Page 4A-20)
09900–06108 09900–25008
Snap ring pliers Multi-circuit tester set
)(Page 4A-16) /
)(Page 4A-19)
)(Page 4A-8) / )(Page 4A-
8)

Suzuki GSF1250 Specifications

General

Displacement	1255 cc
Bore x Stroke	79.0 mm x 64.0 mm
Compression Ratio	10.5:1
Fuel System	Fuel injection
Transmission	6-speed, constant mesh
Front Suspension	Telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Front Tire	120/70ZR17M/C (58W), tubeless
Rear Tire	180/55ZR17M/C (73W), tubeless
Overall Length	2130 mm
Overall Width	790 mm
Seat Height	805 mm
Wheelbase	1485 mm
Fuel Tank Capacity	19.0 L
Starter	Electric
Final Drive	Chain
Ignition	Electronic ignition (transistorized)
Engine Type	4-stroke, liquid-cooled, DOHC
Ground Clearance	135 mm