Suzuki GSF1250 Service Manual

4B-9 Front Brakes:
Special Tools and Equipment
Recommended Service Material
B718H14208001
NOTE
Required service material is also described in the following.
“Front Brake Components (Page 4B-1)”
Special Tool
B718H14208002
Material SUZUKI recommended product or Specification Note
Brake fluid DOT 4 — )(Page 4B-5) / )(Page 4B-
5)
Thread lock cement Thread Lock Cement Super 1360 or
equivalent
P/No.: 99000–32130 )(Page 4B-7)
09900–20205 09900–20607
Micrometer (0 – 25 mm) Dial gauge (1/100 mm, 10
mm)
)(Page 4B-7) )(Page 4B-7)
09900–20701 09930–11920
Magnetic stand Torx bit (JT40H)
)(Page 4B-7) )(Page 4B-3) / )(Page 4B-
4) / )(Page 4B-6)
09930–11940
Bit holder
)(Page 4B-3) / )(Page 4B-
4) / )(Page 4B-6)

Suzuki GSF1250 Specifications

General

Displacement	1255 cc
Bore x Stroke	79.0 mm x 64.0 mm
Compression Ratio	10.5:1
Fuel System	Fuel injection
Transmission	6-speed, constant mesh
Front Suspension	Telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Front Tire	120/70ZR17M/C (58W), tubeless
Rear Tire	180/55ZR17M/C (73W), tubeless
Overall Length	2130 mm
Overall Width	790 mm
Seat Height	805 mm
Wheelbase	1485 mm
Fuel Tank Capacity	19.0 L
Starter	Electric
Final Drive	Chain
Ignition	Electronic ignition (transistorized)
Engine Type	4-stroke, liquid-cooled, DOHC
Ground Clearance	135 mm