Suzuki GSF1250 Service Manual

9B-2 Lighting Systems:
Headlight Removal and Installation
B718H19206024
GSF1250/A
Removal
1) Removal the headlight mounting screws.
2) Disconnect the headlight coupler (1) and position
light coupler (2).
3) Remove the front brake hose clamp bolt (3)
(GSF1250) or front brake hose joint mounting bolt
(4) (GSF1250A).
4) Remove the headlight beam vertical adjuster plate
mounting bolts (5).
5) Disconnect the respective couplers and remove the
headlight housing (6).
GSF1250
GSF1250A
Installation
Installation is in the reverse order of removal. Pay
attention to the following point:
• After installing, be sure to inspect the headlight beam.
Refer to “Headlight Beam Adjustment (Page 9B-5)”.
I718H1920006-01
1
2
I718H1920007-01
5
3
6
I718H1920040-04
6
5
4
I718H1920008-03

Suzuki GSF1250 Specifications

General

Displacement	1255 cc
Bore x Stroke	79.0 mm x 64.0 mm
Compression Ratio	10.5:1
Fuel System	Fuel injection
Transmission	6-speed, constant mesh
Front Suspension	Telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Front Tire	120/70ZR17M/C (58W), tubeless
Rear Tire	180/55ZR17M/C (73W), tubeless
Overall Length	2130 mm
Overall Width	790 mm
Seat Height	805 mm
Wheelbase	1485 mm
Fuel Tank Capacity	19.0 L
Starter	Electric
Final Drive	Chain
Ignition	Electronic ignition (transistorized)
Engine Type	4-stroke, liquid-cooled, DOHC
Ground Clearance	135 mm