Suzuki GSF1250 Service Manual

Body Structure: 9E-5
Specifications
Tightening Torque Specifications
B718H19507001
NOTE
The specified tightening torque is also described in the following.
“Body Frame Construction (Page 9E-1)”
“Front Footrest Bracket Construction (Page 9E-2)”
“Side-stand Construction (Page 9E-3)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications in Section
0C (Page 0C-7)”.
Special Tools and Equipment
Recommended Service Material
B718H19508001
NOTE
Required service material is also described in the following.
“Side-stand Construction (Page 9E-3)”
“Center Stand Construction (Page 9E-4)”

Suzuki GSF1250 Specifications

General

Displacement	1255 cc
Bore x Stroke	79.0 mm x 64.0 mm
Compression Ratio	10.5:1
Fuel System	Fuel injection
Transmission	6-speed, constant mesh
Front Suspension	Telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Front Tire	120/70ZR17M/C (58W), tubeless
Rear Tire	180/55ZR17M/C (73W), tubeless
Overall Length	2130 mm
Overall Width	790 mm
Seat Height	805 mm
Wheelbase	1485 mm
Fuel Tank Capacity	19.0 L
Starter	Electric
Final Drive	Chain
Ignition	Electronic ignition (transistorized)
Engine Type	4-stroke, liquid-cooled, DOHC
Ground Clearance	135 mm