Brother PR655 - Attachment of LCD Supply Assy

3 - 4
Main unit
Operation panel
Assembly Assembly
4 Attachment of LCD supply assy
1. Attach the ferrite core 1 to the ferrite holder 2.
2. Attach the ferrite core 1 and the ferrite holder 2 to the PCB base plate 3.
*Note
• Check that hang the 2 hooks 4 of the ferrite holder 2 on the
PCB base plate 3.
3. Attach the PCB base plate 3, the LCD space 5, the LCD supply assy 6,
the electric static preventer 7 and the touch panel 8 to the panel front
cover badge assy 9 with the 5 screws 1.
*Note
• Check that the touch panel 8 is attached correctly.
If the touch panel 8 is not attached correctly, damage the
touch panel 8.
4. Insert the FFC 0 into the ferrite core 1.
1
1
2
3
4
103 2
1
2
Screw, Bind
M3X8
Color; Silver