H00007091 - Absolute Arm User Manual │Version 5.2.0 (2019-03-07) │9
Low quality power supply: Components deterioration
► Use of a UPS
► In case of a very low-quality power supply (current or voltage pikes, no ground …), it is recommended
to use a Universal Power Supply device, to ensure the protection of the components of the arm (Arm
power supply, electronic boards).
Laser Scanner RS5: Laser Guide Product Class 2M
Exposure toward the eye can result in eye injury
► Pay attention not to expose the eye to the laser guide when laser is on.
Non-Contact Tube Probe (Laser Guide Product Class 2M): Risk of eye injury!
► Do not stare into laser guide beam or view directly with optical instruments
Transport: Risk of body injury!
► Use proper posture when lifting the arm from the case, placing the arm in the case, or moving the
case
Servicing
► Only Hexagon certified service centres are allowed to service the Absolute arm or its accessories.
► Do not open any part of the arm of its accessories.
Arm use: Components deterioration
► Do not switch on ABSOLUTE ARM when covers have been removed
► Do not use outdoors
► Do not remove any axis covers
► Do not cut or twist any cable
► Always carefully plug and unplug each connector
► When using the arm, always pay attention to obstacles that may damage the device
► Do not store the arm, computer, or case in a place where there is risk of:
• Significant heat or cold
• Significant moisture
• Electromagnetic or vibratory disturbance