Introduction
H00007091 - Absolute Arm User Manual │Version 5.2.0 (2019-03-07) │4
INTRODUCTION
Dear customer, thank you for purchasing a HEXAGON
®
product. Before you start using your new
HEXAGON
®
3D measuring arm, please read these instructions.
This guide describes best practices for installing, configuring, and using your measuring arm.
For any other device or option not described in this manual please refer to other HEXAGON
®
product
manuals (e.g. RDS Data Collector, RDS User) available on the provided media.
For further information, please contact your local Hexagon Manufacturing Intelligence agent.
TRADEMARK NOTE
© Copyright 2019 Hexagon Manufacturing Intelligence. All rights reserved. Hexagon Manufacturing
Intelligence is part of Hexagon.
HEXAGON
®
and ABSOLUTE ARM™ are trademarks of HEXAGON AB.
Windows
®
is a trademark of Microsoft Inc.
Wi-Fi
®
and the Wi-Fi logo are trademarks of Wi-Fi Alliance.
The Bluetooth
®
word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Hexagon Manufacturing Intelligence is under license.
Other brands and product names are trademarks of their respective owners.
IMPORTANT NOTE
All information contained in this document is subject to be modified without any notification and does not
represent any engagement from HEXAGON AB. The software described in this manual is furnished under
licence agreement and must be used only in conformity with the terms of this licence. No part of this manual
may be reproduced or transmitted under any form or by any way, electronic or mechanical, including
photocopy or recording, for any purpose without Hexagon AB formal authorisation.
© HEXAGON MANUFACTURING INTELLIGENCE
DISCLAIMER NOTE
All non-authorised modification, repair or bad use of the HEXAGON
®
system will automatically void the
original manufacturer’s guaranty. The manufacturer is not responsible for damages to the software or
hardware caused by unauthorised handling, or use, of this material. For information regarding the warranty,
repair, technical assistance, latest updates and current information prices, please contact your local
Hexagon Manufacturing Intelligence agent.
PATENT NOTICE
Products described in this manual may be covered by one or more of the following U.S. patents 5,829,148;
6,598,306; 7,003,892; 7,568,293; 7,779,548; 7,908,757; D643,319; 8.174.682; 8,151,477; 8,407,907;
8,701,299 and other U.S. and foreign patents pending.
AVAILABILITY OF THE PRODUCTS ON THE MARKETS
All the products described in this manual may not be available in all the countries. Please refer to your
Hexagon Manufacturing Intelligence agent.
To Next Page
Loading...
Need help?
General
