Hexagon Absolute Arm RS5 User Manual

Components description
H00007091 - Absolute Arm User Manual │Version 5.2.0 (2019-03-07) │32
B.2.4 CONTROL PACK CHANGE
By default, the Control Pack is already installed on the arm at the delivery.
In case of upgrade to another FP, or for service, to install or take off from the arm, please read the following
instructions.
1. With a screw driver, unlock and open the side doors.
2. Remove the batteries (CP2 and CP3 only)
3. Remove the 4 screws to release the Control Pack (2 on each side)
4. Take off the Control Pack
5. On the new Control Pack, open the side doors and remove the batteries (CP2 / CP3).

Hexagon Absolute Arm RS5 Specifications

General

Brand	Hexagon
Model	Absolute Arm RS5
Category	Robotics
Language	English