Aberlink3D
Aberlink3D is designed to work with many different kinds of measuring devices including manual CMM's,
CNC's, arms and vision systems. Installation is the same whatever device you are using. The Green
Keylock Dongle will define which options can be accessed by Aberlink3D via machine set up -> scales.
Please see “Aberlink3D Keylock Installation”.
Run the setup.exe from the CD. Click next until you come to the select components - custom installation.
Choose “Retrofit”. In practice it makes no functional difference which option you choose. This option only
sets the reference picture and relevant section of the language file, neither of which is used by the Absolute
Arm. Click through the next windows. Various other packages will be installed i.e. .Net framework etc.
Again, these are standard installs, just follow the prompts and select the default settings.
Configuring Aberlink3D
The following steps must be carried out by an administrator.
Use the ‘Tech…’ button (code 2.718) to open the
technical details side of the form.
Use the default settings you will need to check
To Next Page
Loading...
Need help?
General
