NEC Univerge SV9100 User Manual

Issue 2.0
4-28 Features and Specifications
Call Park Retrieve – K-CCIS
FEATURE DESCRIPTION
This feature allows a station user to retrieve Parked Calls at remote sites across
K-CCIS. Locally parked calls can be retrieved from a remote system, connected via
K-CCIS, by dialing the Call Park Hold Group Number, plus the park orbit location.
SYSTEM AVAILABILITY
Terminal Type:
All Terminals
Required Components:
GCD-CCTA
- OR -
GPZ-IPLE
OPERATING PROCEDURES
Retrieve Park Call at remote location:
1. Go off-hook, and wait for internal dial tone.
2. Dial the Call Park Retrieve Access Code *6 (default) + Park Hold Group
Number (1~64) + Park Orbit Number (1~64) of the call to be retrieved. Call
Park Retrieve access codes cannot be the same at all locations in the K-
CCIS Network.
3. Talk with party.
SERVICE CONDITIONS
General:
 A different Call Park Retrieve Access Code must be programmed for each
system in the K-CCIS network.
 The Park Group Number and Park Orbit Number must be dialed immediately
following the Park Retrieve Service Code.
 When two or more stations attempt to retrieve the parked call, only one station
can retrieve the call.

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards