NEC Univerge SV9100 User Manual

Issue 2.0
7-8 H.323 Trunking
2.4.2 Caller ID (H.323)
Use the following programs to assign H.323 caller ID.
Table 7-7 H.323 Caller ID Assignments
Program/
Item No.
Description/
Selection
Assigned Data Comments
21-17-01
IP Trunk (SIP) Calling Party
Number Setup for Trunk
Up to 16 digits
(1~0, *, #)
Default not assigned
Enter the CPN to be used for calls
made via the selected trunk.
21-18-01
IP Trunk (H.323) Calling Party
Number Setup for Extension
Up to 16 digits
(1~0, *, #)
Default not assigned
Enter the CPN to be used for calls
made via the selected H.323
Extension.
This Program overrides the
programming in Program 21-17
20-08-13
Class of Service Options
(Outgoing Call Service) –
ISDN CLIP
0 = Off
1 = On
Default is 1
Determine if the Calling Line Identity
presentation and screening indicators
are allowed.
20-09-02
Class of Service Options
(Incoming Call Service) –
Caller ID Display
0 = Off
1 = On
Default is 1
Turn Off or On the Caller ID display at
an extension.

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards