NEC Univerge SV9100 User Manual

SV9100 Networking Manual 1-1
Chapter 1
UNIVERGE
®
SV9100
General Information <US Only>
This chapter provides a system outline, the name and functions of the circuit cards
required, system capacity, time slot assignments, system specifications and network
structure considerations for UNIVERGE SV9100 K-CCIS.
SECTION 1 SYSTEM OUTLINE
Key-Common Channel Interoffice Signaling (K-CCIS) can interface this system with
a Public Network. The system is configured with the (GCD-CCTA) for CCIS Trunk
Interface/CCH. The GCD-CCTA is the Digital Trunk Interface required for receiving/
transmitting common signaling data from/to the distant office. A Phase Locked
Oscillator (PLO) for digital network synchronization is built into the GCD-CP10.
The system can provide a variety of interoffice service features such as Link
Reconnect, Virtual Look Ahead Routing, Centralized Voice Mail/Auto Attendant
Integration, Call Forwarding, Voice Call with Hands free Answerback and Caller ID
Display. For a more detail description refer to Chapter 4 . For a diagram of the
system outline, refer to Figure 1-1 K-CCIS System Outline.
Figure 1-1 K-CCIS System Outline

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards