Issue 2.0
13-36 AspireNet
Related Programs
3.18 Intercom
An extension user can make an intercom call to a networked system if the networked extensions are
defined with the Network Access Code (Program 11-01, Dial Type = 8)
A user can change the signaling type for the intercom call they place to either a voice announce or ringing
call to extension in a networked system.
Operation
To place an Intercom call:
1. At system phone, press SPK key.
OR
At single line telephone, lift handset.
2. Dial extension number (or 0 for your operator).
Your call may voice-announce or ring the called extension. Dial 1 to change the way your call alerts the
called extension.
If the extension you call is busy or doesn’t answer, you can dial another extension without hanging up.
Related Programs
Program Number Title
20-01-04 System Options - Network BLF Indication
20-02-03 System Options for Multi-Line Telephones - BLF Control
20-13-06 Class of Service Options (Supplementary Service) - Automatic Off Hook
Signaling
20-06-01 Class of Service for Extensions
30-02-01 110 button DSS Console Key Assignment
30-05-01 DSS Console Lamp Table
Program Number Title
11-12-06 Service code of Voice/Signal Change
11-16-03 One digit service code of Voice/Signal Change
20-06-01 Class of Service for Extensions
20-08-01 Class of Service Options (Outgoing Call Service) - Intercom Calls
To Next Page
Loading...
Need help?
General
