Issue 2.0
8-26 IP Multiline Station (SIP)
SECTION 15 IP STATION (SIP MULTILINE TELEPHONE)
15.1 IP Phone Registration Modes
The SIP MLT supports three different registration modes.
Plug and Play
Automatic Login
Manual Login
Plug and Play Registration
Plug and play registration mode allows for no authentication. As long as an IP
terminal is configured with the proper IP addressing scheme, and plugged into the
network, the phone comes on-line. In plug and play mode you may assign an
extension number into the IP terminal or allow the system to automatically set an
unused extension number for the station. When the system assigns unused
extension numbers it starts searching for the first available port or starts at a
preassigned port and works its way up from there.
Automatic Login
When set to automatic login the SIP user name and password must be entered in
the configuration in the IP terminal. When the phone tries to register with the CPU
it checks the user name and password against its database. If the user name and
password match, the phone is allowed to complete registration. If the user name
and password do not match, the phone cannot register with the CPU. The IP
terminal displays an error message: Unauthorized Auto Login.
Enter the software version of the
files stored on the TFTP/FTP
server.
Enter the Hardware version of the
IP telephone.
To Next Page
Loading...
Need help?
General
