Issue 2.0
SV9100 Networking Manual 13-19
3.2 Barge In
Barge In is available in the Networking feature with the following options:
• Barge into a conversation between an extension’s own system and a networked system
• Barge into a conversation between callers in a networked system
• Barge into a call between two networked systems
Barge In can be used in either Monitor Mode (Silent Monitor) or Speech Mode (determined in Program 20-
13-10).
Barge In cannot barge into calls across the network in the following instances:
• Conference calls
• Off hook signaling a telephone in the other system
• Barge into an extension’s call without first calling the busy extension in the other system
Operation
To Barge In after calling a busy extension:
An analog trunk call must be set up for 10 seconds before you can Barge In.
Listen for busy/ring or busy tone.
1. Call busy extension.
2. Dial Barge In service code 710
OR
3. Press Barge In key (PGM 15-07 or SC 751: 34).
Related Programs
Program Number Title
11-12-08 Service Code Setup (for Service Access) - Barge In
11-16-02 One Digit Service Code Setup - Barge In
20-13-15 Class of Service Options (Supplementary Service) - Barge In, Initiate
20-13-16 Class of Service Options (Supplementary Service) - Barge In, Receive
20-13-17 Class of Service Options (Supplementary Service) - Barge In Tone/
Display
To Next Page
Loading...
Need help?
General
