Issue 2.0
SV9100 Networking Manual 4-105
Uniform Numbering Plan – K-CCIS
FEATURE DESCRIPTION
In a K-CCIS network, a Uniform Numbering Plan enables a multiline terminal user to
call any other multiline terminal in the network. Two types of numbering plans are
provided. In the first plan, the station user dials any telephone number from two to
eight digits. The location of the office is identified by the first digit or first two digits of
the telephone number. In the second plan, the station user dials a one-, two- or
three-digit office code and a telephone number from two to eight digits.
For more details, refer to the UNIVERGE SV9100 Features and Specifications
Manual.
SYSTEM AVAILABILITY
Terminal Type:
All multiline terminals
Required Components:
GCD-CCTA
- OR -
GPZ-IPLE
OPERATING PROCEDURES
To call a station at another office using Numbering Plan 1 (Closed Numbering Plan):
1. Lift the handset or press Speaker.
2. Dial the remote K-CCIS station number.
To call a station at another office using Numbering Plan 2 (Open Numbering Plan):
1. Lift the handset or press Speaker.
2. Dial the trunk Access Code (normally 8).
3. Dial the Office Code number.
4. Dial the remote K-CCIS station number.
To Next Page
Loading...
Need help?
General
