Issue 2.0
7-6 H.323 Trunking
2.3.2 H.323 Alias Address Setup
Use the following programs to assign H.323 alias address setup
information.
10-17-04
H.323 Gatekeeper Setup –
Preferred Gatekeeper
Maximum 124 characters
Default not assigned
If Program 10-17-01 is set to 1, enter
the Gatekeeper ID. When registering
with an external Gatekeeper using
Gatekeeper search, two or more
GRQs (Gate Keeper Request) may
be assigned. In this case, if this ID is
set up, it registers with a Gatekeeper
using the ID set up in this program
(124 characters max).
Table 7-4 H.323 GateKeeper Setup Assignments (Continued)
Program/
Item No.
Description/
Selection
Assigned Data Comments
Table 7-5 H.323 Alias Address Setup Assignments
Program/
Item No.
Description/
Selection
Assigned Data Comments
10-18-01
H.323 Alias Address Setup –
Alias Address
Dial up to 12 digits
(0~9, *, #)
Default not assigned
Enter the Alias Address of the
UNIVERGE SV9100 system
registered into the external
Gatekeeper.
(12 digits max).
This is the System Code of Local
System.
10-18-02
H.323 Alias Address Setup –
Alias Address Type
0 = E164
Default = 0
Define the type of Alias Address
registered to the external Gatekeeper.
At this point, only E.164 can be
entered.
To Next Page
Loading...
Need help?
General
