NEC Univerge SV9100 User Manual

Issue 2.0
4-60 Features and Specifications
Dial Access to Attendant – K-CCIS
FEATURE DESCRIPTION
This feature allows a station user to call an Attendant by dialing a call code through
the K-CCIS network.
For more details, refer to the UNIVERGE SV9100 Features and Specifications
Manual.
SYSTEM AVAILABILITY
Terminal Type:
All multiline terminals
Required Components:
GCD-CCTA
- OR -
GPZ-IPLE
OPERATING PROCEDURES
To call an Attendant Position:
1. Lift the handset or press Speaker.
2. Dial 9 or the operator call code if it is different from 9.
SERVICE CONDITIONS
General:
 The operator call code must be for an individual Attendant Access Code
number.
 When calling to a UNIVERGE SV9100 Attendant Position, the SV9100 sends
Operator to the call originator as the name.

Shows Office Code if using Open Numbering Plan.
 If using an Open Numbering Plan, and a call is made to an UNIVERGE SV9100
Attendant Position, the operator office code is included with the name.
 When making a call from a UNIVERGE SV9100 Attendant Position across a
K-CCIS network, the Caller ID Name and Number display is the same as for a
station-to-station call.

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards