NEC Univerge SV9100 User Manual

SV9100 Networking Manual 12-1
Chapter 12
UNIVERGE
®
SV9100
All DSP Busy Indication
SECTION 1 INTRODUCTION
The All DSP Busy feature is used to alert users via telephone displays and/or Alarm
reports when all DSP resources in the system are being used. This can be used to
trouble shoot issues or to alert when the current hardware might need to be
upgraded to a higher capacity.
Alarm Message Format:
The Alarm message for will vary depending on what type of resource is unavailable
and whether the system is stand alone, Netlink or CCISoIP. This will be displayed on
telephones and included in printed or emailed Alarm Reports.
Table 12-1 Alarm Types
Parameters Description
STA DSP for IP Station Calls Were All Busy.
TRK DSP for Trunk Calls Were All Busy, includes SIP and
CCISoIP Trunks.
NET DSP for CCISoIP Networking Calls Were All Busy.
LNK SP for NetLink Calls Were All Busy.

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards