NEC Univerge SV9100 User Manual

Issue 2.0
SV9100 Networking Manual 4-39
Calling Number Display – K-CCIS
FEATURE DESCRIPTION
This feature permits the number of a calling or called party at another switching
office, to be displayed on a multiline terminal through the K-CCIS network.
For more details, refer to the UNIVERGE SV9100 Features and Specifications
Manual.
SYSTEM AVAILABILITY
Terminal Type:
All multiline terminals
Required Components:
GCD-CCTA
- OR -
GPZ-IPLE
OPERATING PROCEDURES
Normal call handling procedures apply.
SERVICE CONDITIONS
General:
 Both the caller/calling station number and name can be displayed on an
UNIVERGE SV9100 station if allowed by Class of Service.
 For incoming or outgoing K-CCIS calls, the Calling/Called Name and Number
are displayed for the entire length of the call including the Elapsed Call Time.
 For an open numbering plan the Office Code number and station number are
displayed for caller/calling station number.
Restrictions:
 The UNIVERGE SV9100 supports 2~8-Digit station numbers.
 When calling over a K-CCIS tandem connection, the calling party number
(CPN) is transferred to the ISDN network.

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards