NEC Univerge SV9100 User Manual

Issue 2.0
4-92 Features and Specifications
Paging Access – K-CCIS
FEATURE DESCRIPTION
This feature allows users to access internal or external paging from remote sites
across the K-CCIS network. Local stations where the external paging equipment is
installed can use the Meet-Me Answer feature to answer the page and establish a
station-to-station K-CCIS call.
For more details, refer to the UNIVERGE SV9100 Features and Specifications
Manual.
SYSTEM AVAILABILITY
Terminal Type:
All multiline terminals
Required Components:
GCD-CCTA
- OR -
GPZ-IPLE
OPERATING PROCEDURES
To access internal or external paging across a K-CCIS network:
1. Lift the handset or press Speaker.
2. Dial the Access Code for the required zone, or press the programmed
Feature Access or One-Touch key.
SERVICE CONDITIONS
General:
 The single external paging zone output built into the basic B64-U20 KSU can
be used for Paging Access – (K-CCIS).
 Program 31-01-02 (Paging Announcement Duration) applies to
Paging Access – (K-CCIS).
 If a user dials during Paging Access – (K-CCIS), DTMF tones are heard from
the external paging equipment at the remote site.

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards