NEC Univerge SV9100 User Manual

Issue 2.0
4-6 Programming
SECTION 7 WHAT THE SOFTKEY DISPLAY PROMPTS MEAN
When using a display telephone in programming mode, various Softkey options are
displayed. These keys will allow you to easily select, scan, or move through the
programs.
SECTION 8 PROGRAMS
This sections describes the programs used to connect the SV9100 to a data network
and to configure the VoIP functions.
Table 4-3 Softkey Display Prompts
Softkey Display Prompts
If you press this
Softkey . . .
The system will. . .
back Go back one step in the program display.
You can press VOLUME
 or VOLUME  to scroll forward or
backward through a list of programs.

Scroll down through the available programs.

Scroll up through the available programs.
select Select the currently displayed program.

Move the cursor to the left.

Move the cursor to the right.
-1
Move back through the available program options.
+1
Move forward through the available program options.

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards