NEC Univerge SV9100 User Manual

Issue 2.0
13-40 AspireNet
Operator, Centralised
3.22 Operator, Centralized
It is possible to have a centralized network operator extension that can be dialed with the operator access
code (0).
Calls to the operator will be queued and answered in order. Up to 32 calls can be queued at the operator
extension. The quantity of network calls that can queue at the operator may be limited by the quantity of
AspireNet channels available.
Operation
The network numbering plan must be set up to route the operator access code (0) to the system that has
the operator extension.
The operator extension must be set in Program 20-17-01.
Centralized Operator
• At System-A extension 2200 must be set as the operator extension in Program 20-17-01.
• At system-B dial 0 must be set as networking in Program 11-01 and routed to the node ID of System-A.
• Users at System A and B can access the operator by dialing 9.
SYSTEM A SYSTEM B
CENTRALIZED
OPERATOR
(EXTN 2200)

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards