NEC Univerge SV9100 User Manual

Issue 2.0
13-32 AspireNet
Direct Inward Li ne (DIL)
3.14 Direct Inward Line (DIL)
A Direct Inward Line (DIL) is a trunk that rings an extension, virtual extension or Department Group
directly. Since DILs only ring one extension or group (i.e., the DIL destination), employees always know
which calls are for them. For example, a company operator can have a Direct Inward Line for International
Sales Information. When outside callers dial the DIL’s phone number, the call rings the operator on the
International Sales line key. The DIL does not ring other extensions.
The outside party can call an extension at a networked system, if the DIL trunk is set to route to the other
system.
Operation
1. An outside caller places a call to a DIL trunk.
2. The call will be routed to the networked system if the DIL target is defined as an extension in the net-
worked system in Program 22-07: DIL Assignment.
Related Programs
Program Number Title
22-02 Incoming Service Type Setup
22-07 DIL Assignment
22-08 Second IRG Setup for Unanswered DIL/IRG

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards