Issue 2.0
SV9100 Networking Manual 13-57
4.6 Programming Names and Text Messages
Several programs (e.g., Program 20-16 : Selectable Display Messages) require you to enter text.
Use the following chart when entering and editing text. When using the keypad digits, press the
key once for the first character, twice for the second character, etc. For example, to enter a C,
press the key 2 three times. Press the key six times to display the lower case letter. The name
can be up to 12 digits long.
MIC
Switch between the different input data fields by pressing MIC. The
cursor moves up to the top row of the display. Pressing
MIC again
moves the cursor back to the middle row.
LINE KEYS
Use pre-programmed settings to help with the program entry. These
settings vary between programs from LINE 1 = 0 (off) and LINE 2 = 1
(on) to preset values for timers where LINE 1 = 5, LINE 2 = 10, LINE 3 =
15, etc.
For programs with this option, the line key, which currently matches the
programmed setting, lights steady.
The display can also indicate Softkey, which will allow you to select the
values as well (-1 and +1 will step through these pre-programmed
settings.)
LINE KEY 1
Program a pause into a Speed Dialing bin.
LINE KEY 2
Program a recall/flash into a Speed Dialing bin.
LINE KEY 3
Program an @ into a Speed Dialing bin.
VOL
Scroll backward through a list of entry numbers (e.g., from extension
etc.) or through entries in a table (e.g., Common Permit Table).
If you enter data and then press this key, the system accepts the data
before scrolling forward.
VOL
Scroll forward through a list of entry numbers (e.g., from extension
etc.) or through entries in a table (e.g., Common Permit Table).
If you enter data and then press this key, the system accepts the data
before scrolling backward.
Table 13-3 Keys for Entering Names
Use this keypad digit . .
.
When you want to. . .
1
Enter characters:
1 @ [ ¥ ] ^ _ ` { | } Æ ¨ Á À Â Ã Ç É Ê ì ó
2
Enter characters: A-C, a-c, 2.
Table 13-2 Keys for Entering Data (Continued)
Keys for Entering Data
Use this key... When you want to...
To Next Page
Loading...
Need help?
General
