NEC Univerge SV9100 User Manual

Issue 2.0
4-18 Features and Specifications
K-CCIS Call Rerouting
FEATURE DESCRIPTION
The CCIS Call Rerouting feature allows a system to use multiple call routing priorities
when remote system trunks are all busy. The four priorities can be local or remote
trunks. For example using ARS and F-Route table priorities the system can try up to
four remote systems or up to three remote systems and a local trunk to route the
outbound call to its destination. If an outbound route is unavailable for any reason the
call will fall through to the next priority.
SYSTEM AVAILABILITY
Terminal Type:
All Terminals
Required Components:
GCD-CP10
GPZ-IPLE
K-CCIS License (0016)
Figure 4-1 K-CCIS Call Rerouting
TRG1 All Busy
3) TRG10 2) TRG10
0
TRG1 isIdle

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards