NEC Univerge SV9100 User Manual

Issue 2.0
SV9100 Networking Manual 4-41
Calling Party Number (CPN) Presentation from
Station – K-CCIS
FEATURE DESCRIPTION
Calling Party Number (CPN) Presentation from Station K-CCIS feature allows each
station of the remote systems a unique 10-digit number (the DID number of the
originating station) to be sent out over the PRI circuit of the main system.
SYSTEM AVAILABILITY
Terminal Type:
All Terminals
Required Components:
GCD-CCTA
- OR -
GPZ-IPLE
OPERATING PROCEDURES
Placing a call with CPN:
1. Lift the handset or press Speaker.
2. Dial 0 + the number.
3. Converse with caller.
4. Hang up the handset.
SERVICE CONDITIONS
Restrictions:
 A maximum of 16 digits can be assigned as the Calling Party Number (CPN) in
Program 21-12-01 and Program 21-13-01.
 The PRI provider must provision for the CPN used for E911. The CPN must be
within the allowable range. For more information please contact your local
ISDN provider regarding allowable ranges.
 The Calling Party Number (CPN) is sent only to the network when the calling
party from the remote system dials a trunk access code of 0 when making an

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards