NEC Univerge SV9100 User Manual

Issue 2.0
5-26 SV9100 IP K-CCIS
2.6 IP K-CCIS Assignment
Use these programs to assign CCIS availability, origination and destination point
codes for IP K-CCIS.
2.7 IP K-CCIS (Peer-to-Peer) Assignment
Use these programs to assign the CCIPS over IP connection method and the TCP
server port number.
Table 5-12 IP K-CCIS Assignments
Program/
Item No.
Description/Selection Assigned Data Comments
50-01-01
CCIS System Setting –
CCIS Availability
0 = Disable
1 = Enable
Default is 0
50-02-03
Connecting System
Settings – Originating
Point Code
0 ~ 16367
Default is 0
Assign the Originating Point
Code for Route ID 9 of own side.
50-03-01
CCIS Destination System
Settings – Destination
Point Code
0 ~ 16367
Default is 0
Assign remote system IP network
information.
PRG 50-03 assignments are only
used only for CCISoIP.
50-03-03
CCIS Destination System
Settings – IP Address (IP
only)
xxx.xxx.xxx.xxx
(xxx = 0 ~ 255)
Default is 0.0.0.0
Assign remote system IP network
information.
PRG 50-03 assignments are only
used for CCISoIP.
50-03-04
CCIS Destination System
Settings – Point Code
Availability
0 : Disable
1 : Enable
Default is 1
Table 5-13 IP K-CCIS (Peer-to-Peer) Assignments
Program/
Item No.
Description/Selection Assigned Data Comments
50-15-02
CCIS over IP Basic
Information Setting –TCP
Server Port Number
0 ~ 65535
Default is 57000
50-15-03
CCIS over IP Basic
Information Setting –
TCP Client Base Port
Number
0 ~ 65535
Default is 59000

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards