NEC Univerge SV9100 User Manual

Issue 2.0
4-14 Features and Specifications
Call Forwarding – Busy/No Answer – K-CCIS
FEATURE DESCRIPTION
This feature permits a call to a Busy or unanswered station to be forwarded to
another station or an Attendant, in another office in the K-CCIS network. The
activation and cancellation of this feature may be accomplished by either the station
user or an Attendant position, if allowed by Class of Service (COS).
For more details, refer to the UNIVERGE SV9100 Features and Specifications
Manual.
SYSTEM AVAILABILITY
Terminal Type:
All multiline terminals
Required Components:
GCD-CCTA
- OR -
GPZ-IPLE
OPERATING PROCEDURES
To set Call Forward – Busy/No Answer – K-CCIS from a Multiline Telephone
(Closed Numbering Plan):
1. Press the Call Forward – Busy/No Answer ON/OFF key.
2. Dial 1 to set.
3. Dial the remote K-CCIS station number.
4. Press Speaker.
- OR -
1. Lift the handset or press Speaker.
2. Dial Access Code
744 (default), then 1 to set.
3. Dial the remote K-CCIS station number.
4. Restore handset or press Speaker.

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards