Chapter 17 Files
1021
Operations on Individual Files
The keyboard window appears. (See “Menu Operations” in Chapter 2
(Volume 1).)
5
Enter a name of not more than eight characters, and press [Enter].
The name you have entered is reflected in the status area.
Notes
• Within the switcher, the names for Initial Status and Setup data are fixed.
You can change the file names on the hard disk or memory card, but the next
time they are reloaded they will revert to the default names.
• The following names cannot be used.
CON, PRN, AUX, CLOCK$, NUL, COM0, COM1, COM2, COM3,
COM4, COM5, COM6, COM7, COM8, COM9, LPT0, LPT1, LPT2,
LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, LPT9
Renaming frame memory files
1
In the File menu, select VF5 ‘Frame Mem’ and HF1 ‘Frame Memory.’
The Frame Memory menu appears. The status area shows the device
status, and a list of files present on the device.
2
Press [File Edit].
3
Select the type of data to be displayed.
• To display still image files, press [Still].
• To display clip files, press [Clip].
• To display extended clip files, press [Ext Clip].
• To display all types of file, press [All].
4
Using any of the following methods, select the file you want to rename.
(When you selected [Clip] or [Ext Clip] in step 3, you cannot select
multiple files.)
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter Adjustment Setting values
1 List L File selection in the left list 1 and upwards
2 List R File selection in the right
list
1 and upwards
3 Num Number to be selected 1 and upwards
To Next Page
Loading...
Need help?
General