Chapter 11 DME Operations
736
Global Effect Operations
Global Effect Operations
Global effects are special effects created by combining the images of
successive channels. The Global Effect menu is used to add these effects. The
following types of global effects are available.
Global effects
Operations common to all global effects
In this section, explanations of the operating procedures for individual global
effects begin with selections from VF1 ‘Ch1 - Ch4’ in the Global Effect menu.
The following are common operations that you must do prior to selecting from
this menu.
1
In the device control block, select the target DME channel.
2
In the menu control block, press the top menu selection button [GLB EFF],
then select VF1 ‘Ch1 - Ch4.’
The Global Effect >Ch1 - Ch4 menu appears.
Name Effect/Image
Combiner Automatically combines the selected images when multiple channels are selected on
one keyer or for one transition.
Brick Creates a rectangular
parallelepiped from 3
successive channels.
Shadow Gives the image a shadow.
To Next Page
Loading...
Need help?
General