Chapter 19 Control Panel Setup (Panel)
1194
Operation Settings (Operation Menu)
assigned to the A and B rows, even if the [UTIL] button is pressed.
(For details, see “Menus and Control Panel” in Chapter 2
(Volume 1).)
Setting Trackball, Joystick, Search Dial, and Double-
Click Sensitivity
You can set the operational sensitivity for trackball, joystick and the buttons
which recall the relevant menus when pressed twice, and the relation of the
rotation angle of search dial with the playback speed.
1
In the Panel >Operation menu, press the [Sensitivity].
The Sensitivity menu appears.
The status area shows a list of the items with their settings.
2
Make the following settings as required.
Trackball and Z-ring sensitivity in normal mode: In the <Trackball
Normal Mode> group, select [×1], [×2], or [×4].
Trackball and Z-ring sensitivity in fine mode: In the <Trackball Fine
Mode> group, select [
1
/
2
], [
1
/
4
], or [
1
/
8
].
Joystick sensitivity in normal mode: In the <Joystick Normal Mode>
group, select [×1], [×2], or [×4].
Joystick sensitivity in fine mode: In the <Joystick Fine Mode> group,
select [
1
/
2
], [
1
/
4
], or [
1
/
8
].
Touch sensitivity for recalling menus by double-clicking buttons: In
the <Double Click> group, select [Fast], [Normal], or [Slow].
Making advanced settings for the search dial
1
In the Panel >Operation >Sensitivity menu, press [Search Dial].
The Search Dial menu appears.
The status area shows a list of the settings and their content.
2
Set the sensitivity for the search dial in jog mode.
When operated with the [JOG] button pressed to be lit amber: In the
<Jog Sensitivity> group, press one of [1 (Slow)] to [6 (Fast)].
When operated with the [JOG] button held down: In the <Jog
Sensitivity (While pressing [JOG] button)> group, press one of [1
(Slow)] to [6 (Fast)].
To Next Page
Loading...
Need help?
General