Chapter 1 MVS-8000 Functions
30
Introduction
Introduction
This manual is the User’s Guide for the MVS-8000/8000SF Multi Format
Switcher system. The MVS-8000 and MVS-8000SF have different numbers of
M/E banks and input/output signals, but are otherwise functionally identical.
This manual refers to these generically as the “MVS-8000 system,” and
describes principally the operation of the system using the CCP-8000 of center
control panels.
The User's Guide for this system comprises three volumes.
For the contents of each volume, see the section “Organization of This User’s
Guide” at the front of this volume.
Devices and system nomenclature
In this manual, when discussing the principal components of the MVS-8000
system, in place of the formal product names, abbreviated names
characterizing the functions and features are sometimes used. When
distinctions between system configurations must be drawn, the terms in the
following table are used.
Principal components and naming
The formal product names of the principal components of the MVS-8000
system, and the terms used in this manual are as follows.
a) Where there are differences among the MVS-8000/8000SF system, MVS-8000A/8000ASF
system, and MVS-8000G/8000GSF system, these may be noted specifically in the relevant
place.
System nomenclature
The following terms are used for systems, depending on the combination of
installed options, and the signal format.
Formal product name Term used in this manual
MVS-8000/8000SF/8000A/8000ASF/8000G/
8000GSF Multi Format Switcher Processor
a)
Switcher or switcher processor
MVE-8000 (MKS-8800)/8000A Multi Format
DME Processor
DME or DME processor or MVE-8000/
8000A
MVE-9000 Multi Format DME Processor DME or DME processor or MVE-9000
CCP-8000, CCP-6224, CCP-6324 Center
Control Panel
Control panel or center control panel
DCU-8000 (MKS-8700) Device Control Unit DCU or MKS-8700
DCU-2000 (MKS-2700) Device Control Unit DCU or MKS-2700
To Next Page
Loading...
Need help?
General