Sony MVS-8000 User Manual

Chapter 2 Menus and Control Panel
134
Basic Menu Operations
a) The menu numbers shown by way of example are those for M/E-1: the same applies to M/E-2,
M/E-3, and P/P. Equally, content applying to Key1 applies equally to Key2, Key3, and Key4.
b) The same applies to Color Bkgd2.
c) The menu numbers shown by way of example are those for CCR1: the same applies to CCR2.
d) The sample applies to Mask2 Adjust.
Operation With a Mouse
If you display the menus in an external
monitor, operated with a mouse, then you
click the mouse instead of pressing a button
as described in the previous section, “Menu
Operations.”
However, in the following cases there are
special operations with a mouse.
To set parameters
To adjust the value of a knob setting
parameter button with the mouse, you can
use either of the following three methods.
• Position the cursor over the knob setting
parameter button for which you want to
adjust the value, and turn the mouse
wheel.
• Position the cursor over the knob setting
parameter button for which you want to
adjust the value, then hold down the right
mouse button, and drag the bar showing
the setting to the desired value.
1116.3
a)
Transition >DME
Wipe Adjust
[Position] 1
2
H
V
1154.1
a)
Edge Direction
>Matte Adjust
[Position] 1
2
Position H
Position V
1155
a)
Main Modify [Position] in the <Position> group
1155.1
a)
Main Modify
>Multi Adjust
[Position]
1156
a)
Sub Modify [Position] in the <Position> group
1156.1
a)
Sub Modify >Multi
Adjust
[Position]
2122.2 Composite
>Pattern Adjust
[Position] 1
2
Position H
Position V
2131 Reposition [Normal]
[Black&White]
2210
Color Bkgd1
b)
[Position]
2412.1
c)
Primary CCR
>Mask1 Adjust
d)
[Position]
4116 DME >Edge
>Wipe Crop
[Position/Size] 5 Pattern
4127 DME >Video
Modify >Mask
[Position/Size]
Knob parameters subject to restriction on default recall
Menu number Menu name Button name Knob Parameter

Sony MVS-8000 Specifications

General

Brand	Sony
Model	MVS-8000
Category	Switch
Language	English