Chapter 7 Frame Memory
413
Frame Memory Clip Operations
For details of the playback start point, stop point, and duration settings, see the
previous item, “Using the device control block (search dial) to play back clips”
(page 411).
To carry out the variable speed playback
Press any of the [SHTL], [JOG], and [VAR] buttons, then turn the Z-ring or
move the joystick. The image changes in the forward direction when you turn
the Z-ring clockwise, and in the reverse direction when you turn it
counterclockwise. Move the joystick to the right for the forward direction and
to the left for the reverse direction.
When you pressed the [JOG] button: Playback is at a speed corresponding
to the turning speed of the Z-ring or the movement speed of the joystick.
When you pressed the [SHTL] button: Playback is at a speed corresponding
to the rotation angle of the Z-ring or amount of movement of the joystick.
When you pressed the [VAR] button: Playback is at a speed corresponding
to the rotation angle of the Z-ring or amount of movement of the joystick,
in the range –1 to +3 times normal speed.
Clip Creation
You save a movie as a clip.
Notes
If the number of frame memory clips exceed 100 single files (50 pair files), an
error appears.
Using the menu to record clips
1
In the Frame Memory menu, select VF2 ‘Clip’ and HF3 ‘Record.’
The Record menu appears.
To Next Page
Loading...
Need help?
General