Chapter 20 Switcher Setup (Switcher)
1232
Settings Relating to Keys, Wipes, Frame Memory and Color Correction (Key/Wipe/FM/CCR Menu)
2
In the <Key Auto Drop> group, press the name of the keyer for which you
want the key to be deleted automatically, turning it on.
Automatically Naming and Saving to Frame Memory
In the Switcher >Key/Wipe/FM/CCR menu, press [FM Auto Store], turning it
on.
Selecting the Bank to Make the Settings
In the following procedures, select the bank to which the settings apply using
any of the following methods, then make the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
The selected bank appears in reverse video.
Selecting the key memory mode
In the <Key Memory> group of the Switcher >Key/Wipe/FM/CCR menu,
select one from Full (full mode)/Simple (simple mode)/Off.
For more details, see “Key Memory” in Chapter 4 (Volume 1).
Knob Parameter Adjustment Setting
values
1 Bank M/E or P/P selection to which settings apply 1 to 4
To Next Page
Loading...
Need help?
General