Chapter 17 Files
1020
Operations on Individual Files
Copying frame memory files
Between steps 3 and 4 of the procedure above, “Copying Files,” do as follows.
1
To select the frame memory folder, press [Default] in the device selection
in the list on the left.
A pull-down menu appears.
2
Press the required folder name.
3
Carry out the same operations as in steps 1 and 2 on the list on the right.
4
Select the type of data to be displayed.
• To display still image files, press [Still].
• To display clip files, press [Clip].
• To display extended clip files, press [Ext Clip].
• To display all types of file, press [All].
Renaming Files
You can rename a file on the hard disk or memory card and a register. As an
example, to rename a snapshot file, use the following procedure.
1
In the File menu, select VF3 ‘Snapshot’ and HF1 ‘Snapshot.’
The Snapshot menu appears. The status area shows the device status, and
a list of files present on the device.
2
Press [File Edit].
A detailed list appears. Here too, you can select a device or specify a
directory. (See page 1015.)
3
Using any of the following methods, select the file you want to rename.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
4
Press [Rename].
Knob Parameter Adjustment Setting values
1 List File selection 1 to 99
To Next Page
Loading...
Need help?
General