Chapter 6 DME Wipes
361
Resizer DME Wipe Setting
Resizer DME Wipe Setting
You can carry out a DME wipe on a key using the resizer.
Notes
• This function is supported by the MVS-8000G.
• When the screen aspect ratio is 4:3 in HD format, when the resizer DME
wipe is used to shrink a video image, this is applied to the 16:9 screen
including the added video on the left and right sides. Use the crop function
as required to extract the 4:3 image.
DME wipe patterns available for resizer DME wipe
You can use the following patterns of the DME wipe pattern one-channel mode
that can be used in a resizer DME wipe. (7000-series numbers)
• Slide (pattern numbers: 7001 to 7008)
• Squeeze (pattern numbers: 7021 to 7031)
• frame in-out (pattern numbers: 7201 to 7208, 7221 to 7224)
Relation between DME wipes and other effects
The following relations hold between a resizer DME wipe and other effects.
Relation to processed keys
It is not possible to select a resizer DME wipe for a key with processed key
enabled.
Relation to resizer
It is not possible to use a resizer DME wipe for a key with resizer enabled.
It is not possible to use a resizer DME wipe for a key forming a pair with a key
with the dual resizer effect enabled. The key combinations forming pairs are
keys 1 and 2, and keys 3 and 4. For example, when a dual resizer effect is
enabled for key 1, it is not possible to use a resizer DME wipe on key 2.
Making resizer DME wipe settings
1
In the <Pattern Select> group of the Key1 DME Wipe Adjust menu, press
[1ch].
The 1ch Pattern Select menu appears.
2
Select [Resizer Slide/Squeeze] or [Resizer Frame I/O].
The patterns of the selected group appear.
To Next Page
Loading...
Need help?
General