EasyManuals Logo
Home>Sony>Switch>MVS-8000

Sony MVS-8000 User Manual

Sony MVS-8000
1364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1071 background imageLoading...
Page #1071 background image
Chapter 18 System Setup (System)
1071
Network Settings (Network Config Menu)
Network Settings (Network Config Menu)
This provides automatic configuration of all devices connected to the Data
LAN (excluding the DCU), and displays a list of them.
To make the network settings, use System >Network Config menu.
To display the Network Config menu
In the Engineering Setup menu, select VF1 ‘System’ and HF1 ‘Network
Config.’
The status area shows the device ID, and Control LAN and Data LAN IP
addresses for each device excluding the DCU.
Making the Network Settings
Checking IP address automatically
1
In the System >Network Config menu, press [Auto Config].
This automatically checks all devices (excluding the DCU) connected to
the Data LAN.
2
Once switch to another menu, then display the Network Config menu
again.
Now the status area of the System >Network Config menu shows the
results of the automatic check.
Notes
Be sure to carry out this operation after reconfiguring the system, or after a
software upgrade.
Using the NFS server
The address of the currently selected NFS server appears in the [NFS Server
Address] box in the lower status area.
Notes
When the control panel is reset, no NFS server can be used via the Network
Config menu. In this case, to use an NFS server, make sure to carry out the
following procedure.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony MVS-8000 and is the answer not in the manual?

Sony MVS-8000 Specifications

General IconGeneral
BrandSony
ModelMVS-8000
CategorySwitch
LanguageEnglish

Related product manuals