Sony MVS-8000 User Manual

Appendix (Volume 2)
1044
1044
Functional Differences With Models of DME
a) Drop shadow is automatically set to off when the function of trail, motion decay, keyframe
strobe or window is on.
b) Effect groups 1 and 2 cannot be selected at the same time. Pattern 304 (round corner) is not
supported.
c) When Shaped Video is off.
d) It is not possible to make settings for external input signals.
Combiner depth
settings (three-
dimensional
crossing function)
(parameter Depth)
4211 No No Yes page 744
Signal format:
720P/50, 1080p/
59.94, 1080p/50
7313.1 No Yes Yes “Setting the Signal
Format (Format
Menu)” in Chapter
18 (Volume 3)
Adding user
texture patterns
(for Spotlighting)
7316.9 No No Yes “Adding User
Texture Patterns”
in Chapter 18
(Volume 3)
Setting the
interface between
DME and switcher
7337.6 No Yes Yes “Setting the
Interface Between
the DME and the
Switcher” in
Chapter 20
(Volume 3)
Setting AUX bus
output/reentry
input
7337.7 – It is not
possible to
make settings
for DME 1 to 8
Ext In.
When using the
DME dedicated
interface, it is not
possible to make
settings for DME
1 to 8 Video/Key.
“Setting the AUX
Bus Output and
Reentry Input” in
Chapter 18
(Volume 3)
TBC window
center position
7341.1 No Yes only when
SDI interface is
used.
c)
Yes only when
SDI interface is
used.
“Setting the TBC
Window Center
Position” in
Chapter 21
(Volume 3)
Adjustment of
monitor output
video clip level
7343 No Yes only when
SDI interface is
used.
Yes only when
SDI interface is
used.
“Adjusting the
Monitor Output” in
Chapter 21
(Volume 3)
Monitor output
signal settings
7343.1 No Yes only when
SDI interface is
used.
Yes “Setting the
Monitor Output” in
Chapter 21
(Volume 3)
Settings relating
to usage of editor
port
7344 Fixed to
Common
Yes Yes “Interfacing With
External Devices
(Device Interface
Menu)” in Chapter
19 (Volume 3)
Function Menu
number
MVE-8000 MVE-8000A MVE-9000 See

Sony MVS-8000 Specifications

General

Brand	Sony
Model	MVS-8000
Category	Switch
Language	English