Chapter 18 System Setup (System)
1115
System Maintenance (Maintenance Menu)
• To select all categories, press [ALL].
3
Press [Lock].
This makes the selected categories candidates for locking. The category
name display color changes to yellow, and the indication “Lock” is
displayed in yellow in the Lock box.
To deselect a lock candidate
After selecting a category, press [Clear] to clear the indication “Lock” in
the Lock box.
4
Repeat steps 2 and 3, to select all of the lock candidates.
5
Press [Execute].
A keyboard window appears.
6
Enter the password with a maximum of 16 characters, and press [Enter].
If the password is correct, the categories selected in the list of candidates
are all locked. The category name display color and the “Lock” indication
color in the Lock box both change to white.
To release the lock
When a lock is already applied, use the following procedure.
1
In the System >Maintenance >File Load Lock menu, press [Lock].
A keyboard window appears.
2
Enter the password.
If the password is correct, the lock is released, and the indication “Lock”
in the Lock box disappears.
To change the lock password
In the System >Maintenance >File Load Lock menu, press [Change Password],
and carry out step 2 and following of “Changing the lock password” (page
1112).
To Next Page
Loading...
Need help?
General