Chapter 19 Control Panel Setup (Panel)
1131
Overall Control Panel Settings (Config Menu)
In the center on the left, [NORM], [NORM/REV], and [REV] appear with
their current assignments.
Notes
This only appears when the transition control block is a standard type or
compact type.
On the lower left, [PTN LIMIT], [LIMIT SET], and [KF] appear with their
current assignments.
Notes
This only appears when the transition control block is a standard type.
4
Press any of the [NORM], [NORM/REV], and [REV] buttons.
The three buttons appear in reverse video.
5
Using any of the following methods, select the button functions for the
assignment from the list on the right.
• Press directly on the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
The following are the button functions.
Normal/Reverse: Use the respective buttons as a [NORM] button,
[NORM/REV] button, and [REV] button for VTR operations.
Play/Stop/Cue: Use the respective buttons as a [PLAY] button, [STOP]
button, and [CUE] button for VTR operations.
6
Press [Set].
The texts on the button displays change to the selected items.
7
Press any of the [PTN LIMIT], [LIMIT SET], and [KF] buttons.
The three buttons appear in reverse video.
8
Select the button functions for the assignment from the list on the right.
• Press directly on the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment Setting values
1Button
Assign
Selection of button functions 1 or 2
To Next Page
Loading...
