To Next Page

To Previous Page

Chapter 20 Switcher Setup (Switcher)

1234

Settings Relating to Keys, Wipes, Frame Memory and Color Correction (Key/Wipe/FM/CCR Menu)

Setting the default wipe edge softness

In the Switcher >Key/Wipe/FM/CCR menu, press [Wipe Edge Default],

turning it on.

Set the following parameter.

Setting the mode in which all signals can be selected for input to

the color corrector

Press [CCR Internal Signal Enable] in the Switcher > Key/Wipe/FM/CCR

menu, turning it on.

You can select signals generated internally to the switcher as material for input

to the color corrector.

Notes

When you select an M/E reentry signal as material for input to the color

corrector, 1H delay occurs to the output signal of M/E.

Knob Parameter Adjustment Setting values

3 Soft Default value of wipe edge

softness

–50.00 to +50.00

default chapter1
- Control Panel: Example Configuration1
- Control Panel: Example Configuration3
- Table of Contents6
Chapter 1 MVS-8000 Functions29
- Introduction30
- Features of the MVS-8000 Multi Format Switcher System33
- Basic Video Processing35
- Transitions35
- Keys39
- Wipes40
- DME Wipes41
- Frame Memory41
- Color Backgrounds41
- Copy and Swap42
- Video Process42
- Color Corrector42
- Side Flags43
- Multi Program 243
- Simple P/P Software44
- Dual Link Support44
- 3D Support45
- Creation of Special Effects and Management of Data and Operations46
- Digital Multi Effects (DME)46
- External Devices47
- Keyframes47
- Snapshots48
- Utility49
- Shotbox49
- Macros49
- Files50
- Setup51
Chapter 2 Menus and Control Panel53
- Names and Functions of Parts of the Control Panel54
- (With Standard Transition Modules)54
- Control Panel: Example Configuration 256
- (With Simple Transition Modules)56
- (With Compact Transition Modules)58
- Cross-Point Control Block59
- Transition Control Block (Standard Type)63
- Flexi Pad Control Block (Standard Type)67
- Key Control Block70
- Device Control Block (Trackball)74
- Device Control Block (Joystick)78
- Device Control Block (Search Dial)79
- Keyframe Control Block82
- Numeric Keypad Control Block85
- Fade to Black Control Block88
- Auxiliary Bus Control Block (for aux Buses)89
- Auxiliary Bus Control Block (for Router Control)91
- Menu Control Block93
- Memory Card/Usb Adaptor Block94
- Memory Stick"/Usb Connections Block95
- Utility/Shotbox Control Block96
- Transition Control Block and Flexi Pad Control Block (Simple Type)97
- Independent Key Transition Control Block (Simple Type)102
- Downstream Key Control Block104
- Downstream Key/Fade-To-Black Control Block106
- Transition Control Block (Compact Type)108
- CCP-6224 2M/E Control Panel110
- E Control Panel111
- Cross-Point Control Block (CCP-6224/6324) in the aux Operating Mode112
- Multifunction Flexi Pad Control Block114
- Basic Menu Operations117
- Menu Organization117
- About the Top Menu List117
- Accessing Menus118
- Displaying a Menu125
- Interpreting the Menu Screen126
- Menu Operations128
- Operation with a Mouse134
- Switching between the Main Menu Site and Subsidiary Menu Site140
- Shortcut Menu140
Chapter 3 Signal Selection and Transitions143
- Video Processing Flow144
- Signal Selection146
- Basics of Signal Selection147
- Bus Selection147
- AUX Panel-Less Function150
- Signal Assignment and Selection151
- Signal Name Display154
- Transitions156
- Selecting the Next Transition156
- Transition Types156
- Procedure for Basic Transition Operation159
- Key Priority Setting162
- Setting the Key Priority in the Transition Control Block162
- Setting the Key Priority by a Menu Operation164
- Display of the Key Output Status and Key Priority166
- Selecting the Transition Type by a Menu Operation167
- Super MIX Settings168
- Color Matte Settings169
- Executing a Transition172
- Transition Indicator Function172
- Setting the Transition Rate173
- Pattern Limit178
- Executing an Auto Transition181
- Executing a Transition with the Fader Lever (Manual Transition)182
- Combinations of Auto and Manual Transitions183
- Non-Sync State183
- Fader Lever Operation in Bus Fixed Mode184
- Transition Preview186
- Independent Key Transitions188
- Basic Independent Key Transition Operations191
- Setting the Independent Key Transition Type by a Menu Operation193
- Setting the Independent Key Transition Rate194
- Fade to Black198
- Fade to Black Operation198
- Setting the Fade to Black Transition Rate199
- Simple Transition200
- Basic Operations for Simple Transitions200
- Display of the Key Output Status and Key Priority202
- Split Fader202
- Independent Key Transitions with a Simple Transition Module203
Chapter 4 Keys207
- Overview208
- Key Types208
- Key Modifiers210
- Key Memory213
- Key Default214
- Key Setting Operations Using Menus215
- Key Setting Menus215
- Key Type Setting216
- Chroma Key Composition218
- Chroma Key Adjustments219
- Selecting Key Fill and Key Source225
- Key Edge Modifications230
- Masks237
- Applying a DME Effect to a Key240
- Specifying the Key Output Destination243
- Key Modify Clear244
- Blink Function244
- Video Processing245
- Key Setting Operations with the Key Control Block246
- Operations in the Key Control Block246
- Key Edge Modifications250
- Masks254
- Applying a DME Effect to a Key255
- Other Key Setting Operations257
- Key Adjustment Operations with the Multifunction Flexi Pad Control260
- Block260
- Resizer267
- Two-Dimensional Transformations of Keys267
- Resizer Interpolation Settings271
- Resizer Crop/Border Settings272
- Applying Resizer Effects275
- Key Snapshots281
- Key Snapshot Operations281
- Key Snapshot Operations Using a Simple Transition Module284
Chapter 5 Wipes287
- Overview288
- Types of Wipe Pattern288
- Basic Procedure for Wipe Settings289
- Wipe Settings Menu289
- Wipe Pattern Selection289
- Pattern MIX291
- Setting Wipe Modifiers296
- Wipe Modify Clear314
- Wipe Settings for Independent Key Transitions315
- Basic Procedure for Independent Key Transition Wipe Settings315
- Setting Independent Key Transition Wipe Modifiers316
- Wipe Snapshots320
- Wipe Snapshot Operations with the Flexi Pad320
- Wipe Snapshot Operations with the Menus323
- Wipe Pattern Operations in the Multifunction Flexi Pad Control Block326
- Recalling a Wipe Snapshot326
- Selecting the Wipe Pattern327
- Editing the Wipe Pattern327
- Saving, Canceling, and Deleting Edited Wipe Patterns330
Chapter 6 DME Wipes333
- Overview334
- Types of DME Wipe Pattern334
- DME Wipe Pattern Variation and Modifiers342
- Relation between DME Wipes and Other Effects344
- Basic Procedure for DME Wipe Settings346
- DME Wipe Settings Menu346
- DME Wipe Pattern Selection346
- Setting DME Wipe Modifiers349
- DME Wipe Modify Clear356
- DME Wipe Settings for Independent Key Transitions357
- Basic Procedure for Independent Key Transition DME Wipe Settings357
- Setting Independent Key Transition DME Wipe Modifiers358
- Resizer DME Wipe Setting361
- DME Wipe Snapshots363
- DME Wipe Snapshot Operations with the Flexi Pad363
- DME Snapshot Operations with the Menus364
- Creating User Programmable DME Patterns365
- User Programmable DME Transition Mode365
- DME Wipe Pattern Operations in the Multifunction Flexi Pad Control370
- Block370
- Recalling a DME Wipe Snapshot370
- Selecting the DME Wipe Pattern370
- Editing the DME Wipe Pattern371
- Saving, Canceling, and Deleting DME Wipe Snapshots374
Chapter 7 Frame Memory375
- Overview376
- Still Image Operations380
- Preparations380
- Interpreting the Frame Memory Menu381
- Selecting an Input Image385
- Selecting Outputs and Target Frame Memory385
- Capturing and Saving an Input Image386
- Recalling Still Images390
- Image Processing393
- Image Output398
- Continuously Capturing Still Images (Record)399
- Recalling a Continuous Sequence of Still Images (Animation)401
- Frame Memory Clip Function405
- Frame Memory Clip Operations407
- Preparations for Operation407
- Recalling Clips407
- Clip Playback409
- Clip Creation413
- Creating and Handling Frame Memory Folders415
- Clip Output416
- Recording and Playback of Ancillary Data417
- Clip Transition Operations419
- Image Data Management422
- Pair File Processing422
- Moving Files423
- Deleting Files424
- Renaming Files425
- File Backups426
- Restoring Files426
- External Hard Disk Drive Access427
- Hard Disk Formatting428
- Saving Files429
- Recalling Files430
- Managing Images Using a DDR/VTR432
- Using a DDR/VTR for High-Speed Backup and Restoring432
- Extracting Images from Video Tape434
Chapter 8 Color Backgrounds, Copy and Swap, and Other Settings437
- Color Background438
- Color Background Settings Menu438
- Basic Color Background Setting Operations438
- Copy and Swap442
- Copy and Swap Operations446
- Copy and Swap Menu Operations446
- Copy by Button Operation447
- Misc Menu Operations449
- Port Settings for Control from an External Device449
- Editing Keyboard Settings450
- Safe Title Settings451
- Displaying a List of Transition Rates and Changing the Settings452
- AUX Menu Operations454
- AUX Bus Settings454
- Status Menu455
- Router Control Menu Operations456
- Checking the List of Inputs for each Destination456
- Switching the Source for each Destination457
- Video Process458
- Video Process Adjustments of a Primary Input Signal458
- Video Process Adjustments on a Particular Bus458
- Video Process Memory459
- Video Process Settings460
Chapter 9 Color Corrector461
- Preparations462
- Overall Color Corrector Operations465
- Enabling Color Corrector465
- Copy and Swap Operations465
- Color Corrector Functions467
- Input Video Processing Operations467
- Primary Color Correction Operations468
- Secondary Color Correction Operations472
- RGB Clip Operations473
- Luminance Processing Operations473
- Spot Color Adjustment476
- Output Video Processing Operations479
- YUV Clip Operations480
Chapter 10 Special Functions483
- Side Flags484
- Overview484
- Side Flag Settings484
- Wipe Action on Images with Side Flags486
- DME Wipe Action for an Image with Side Flags487
- Multi Program 2489
- Overview489
- Sequence of Operations in Multi Program 2490
- Basic Operations (Required)491
- Examples of Operations in the Multi Program 2 Mode495
- Switcher Bank)495
- Optional Operations496
- Functions Added in Multi Program 2 Mode500
- Differences between Multi Program 2 Mode and Standard Mode501
- Restrictions on Using Multi Program 2 Mode502
- Simple P/P Software504
- Overview504
- Restrictions on Use504
- Dual Link Support508
- 3D Support511
- Overview511
- Preparations512
- Restrictions in 3D Mode518
- Video Creation in 3D Mode518
Appendix (Volume 1)521
- Wipe Pattern List522
- Standard Wipes522
- Enhanced Wipes523
- Rotary Wipes524
- Mosaic Wipes525
- Random/Diamond Dust Wipes527
- DME Wipe Pattern List528
- DME Wipe Patterns Available in One-Channel Mode528
- DME Wipe Patterns Available in Two-Channel Mode536
- DME Wipe Patterns Available in Three-Channel Mode541
- Resizer DME Wipe Pattern List542
- Menu Tree544
- Recalling Menus544
- M/E-1 to M/E-3 Menus544
- PGM/PST Menu547
- Frame Memory Menu549
- Color Bkgd Menu550
- AUX Menu550
- CCR Menu551
- Copy/Swap Menu552
- Misc Menu552
- Status Menu553
- DME Menu554
- Global Effect Menu555
- Device Menu555
- Macro Menu556
- Key Frame Menu557
- Effect Menu558
- Snapshot Menu559
- Shotbox Menu560
- File Menu561
- Engineering Setup Menu562
- Diagnostic Menu566
- Volume 2569
Chapter 11 DME Operations571
- Dme572
- Three-Dimensional Transformations573
- Transformation Operation Modes579
- Graphics Display583
- Three-Dimensional Parameter Display585
- Three-Dimensional Transformation Operations586
- Basic Operations586
- Three-Dimensional Parameter Display591
- Entering Three-Dimensional Parameter Values593
- Graphics Display Operation594
- Canceling Virtual Images596
- DME Special Effect Operations597
- Special Effects597
- Operations Common to All DME Special Effects611
- Border Settings612
- Crop Settings614
- Beveled Edge Settings616
- Key Border Settings618
- Art Edge Settings619
- Flex Shadow Settings627
- Wipe Crop Settings634
- Color MIX Settings638
- Defocus Settings640
- Blur Settings643
- Multi Move Settings645
- Sepia Settings646
- Mono Settings647
- Posterization and Solarization Settings647
- Nega Settings648
- Contrast Settings649
- Mosaic Settings650
- Sketch Settings650
- Metal Settings653
- DIM and Fade Settings654
- Glow Settings655
- Mask Settings657
- Freeze Settings659
- Nonlinear Effect Settings661
- Corner Pinning Settings691
- Lighting Settings694
- Trail Settings699
- Motion Decay Settings703
- Keyframe Strobe Settings705
- Wind Settings707
- Spotlighting Settings709
- Background Settings727
- Separate Sides Settings728
- Shaped Video Settings728
- Invert Settings730
- Key Density Settings731
- Key Source Selection731
- Interpolation Settings732
- Global Effect Operations736
- Combiner Settings737
- Brick Settings745
- Shadow Settings749
Chapter 12 External Devices753
- Control of External Devices754
- Shared Functions for External Device Control755
- Control of P-Bus Devices757
- Creating and Editing the P-Bus Timeline757
- P-Bus Trigger760
- Control of GPI Devices762
- GPI Timeline Creation and Editing762
- Control of Vtrs, Extended Vtrs, and Disk Recorders766
- Manual Operation766
- Controlling the Tape/Disk Transport767
- Checking Vtr/Disk Recorder/Extended VTR Information773
- Cueup & Play774
- Vtr/Disk Recorder/Extended VTR Timeline782
- Disk Recorder/Extended VTR File Operations789
Chapter 13 Keyframe Effects793
- Regions794
- Registers796
- Keyframes798
- Effects798
- Saving and Recalling Effects798
- Effect Attributes798
- Effect Editing799
- Time Settings800
- Paths804
- Effect Execution810
- Master Timelines810
- Sequence of Keyframe Operations810
- Displaying the Timeline Menu812
- Interpreting the Timeline Menu812
- Settings in the Timeline Menu814
- Recalling a Register816
- Specifying the Region and Edit Points825
- Selecting the Region in Which Editing Applies825
- Setting the Edit Points828
- Creating and Editing Keyframes830
- Creation830
- Insertion831
- Modification831
- Deletion835
- Movement836
- Copying837
- Pause837
- Keyframe Loop (Repeated Execution of a Specified Range)838
- Undoing an Edit Operation841
- Duration Mode Setting841
- Transition Mode Settings for User Programmable DME842
- Keyframe Creation and Editing in the Multifunction Flexi Pad Control Block842
- Time Settings845
- Setting the Keyframe Duration845
- Setting the Effect Duration846
- Setting the Delay847
- Path Setting848
- Basic Procedure for Path Settings848
- Executing Effects852
- Executing Effects in the Keyframe Control Block852
- Setting the Run Mode854
- Executing an Effect in the Flexi Pad Control Block855
- Executing an Effect in the Multifunction Flexi Pad Control Block855
- Saving Effects857
- Creating and Saving a Master Timeline859
- Keypad Control Block859
- Creating and Saving a Master Timeline Using the Buttons in the Multifunction Flexi Pad Control Block859
- Creating and Saving a Master Timeline with the Menu863
- Register Operations in the Menus866
- Effect Attribute Settings866
- Effect Status Display867
- Effect Register Editing867
- Displaying a List of Effect Registers for Editing872
Chapter 14 Snapshots875
- Overview876
- Snapshot Types876
- Snapshot Attributes877
- Snapshot Operations from the Numeric Keypad Control Block880
- Saving and Recalling Snapshots880
- Snapshot Operations in the Flexi Pad Control Block885
- Banks and Registers885
- Saving and Recalling Snapshots886
- Snapshot Operations in the Multifunction Flexi Pad Control Block891
- Saving and Recalling Snapshots891
- Snapshot Operations in the Menus898
- Selecting a Region or Reference Region in a Menu898
- Setting Snapshot Attributes898
- Snapshot Status Display901
- Setting Key Snapshot Attributes903
- Creating and Saving a Master Snapshot903
- Snapshot Register Editing904
- Displaying a List of Snapshot Registers for Editing905
- Operations in the Misc >Snapshot Menu905
Chapter 15 Utility/Shotbox909
- Utility Execution910
- Executing a Utility with the User Preference Buttons910
- Block)910
- Executing a Utility in the Utility/Shotbox Control Block911
- Executing Utilities with the Cross-Point Buttons in the Key 2 Row912
- Shotbox914
- Shotbox Register Creation915
- Creating a Shotbox Register in the Numeric Keypad Control Block915
- Creating a Shotbox Register in the Multifunction Flexi Pad Control Block917
- Creating a Shotbox Register Using the Menus919
- Shotbox Execution923
- Shotbox Execution from the Numeric Keypad Control Block923
- Shotbox Execution in the Multifunction Flexi Pad Control Block or the Flexi Pad Control Block924
- Shotbox Execution in the Utility/Shotbox Control Block926
- Executing a Shotbox Function with the Key 2 Row Cross-Point Buttons927
- Shotbox Register Editing929
Chapter 16 Macros931
- Macros932
- Overview932
- Macro Creation and Editing935
- Macro Execution938
- Macro Operations in the Numeric Keypad Control Block and the Keyframe Control Block939
- Recalling a Macro Register and Executing a Macro940
- Creating and Editing a Macro941
- Saving a Macro948
- Macro Operations in the Standard Type Flexi Pad Control Block950
- Recalling a Macro Register and Executing a Macro951
- Creating and Saving a Macro954
- Macro Operations in the Simple Type Flexi Pad Control Block958
- Recalling a Macro Register and Executing a Macro959
- Creating and Editing a Macro960
- Saving a Macro963
- Macro Operations in the Multifunction Flexi Pad Control Block964
- Recalling a Macro Register and Executing a Macro964
- Creating and Editing a Macro966
- Macro Editing Using Menus968
- Macro Register Editing968
- Online Editing of Macro Events968
- Offline Editing of Macro Events974
- Macro Attachment Assigning980
- Setting and Canceling a Macro Attachment983
- Displaying the Macro Attachment List987
- Executing a Macro by Macro Attachment988
- Menu Macros991
- Recalling a Menu Macro Register and Executing a Menu Macro992
- Menu Macro Creation and Editing996
- Menu Macro Register Editing1001
- Macro Timeline1003
- Creating and Editing a Macro Timeline1005
Chapter 17 Files1007
- Overview of File Operations1008
- Operations on Individual Files1013
- Displaying the Individual File Operation Menus1013
- Viewing Detailed File Information1013
- Selecting Regions1015
- Selecting a Device for Operations1015
- Saving Files1016
- Loading Files1018
- Copying Files1019
- Renaming Files1020
- Deleting Files1022
- Converting between Frame Memory Clips and Extended Clips1023
- File Batch Operations1027
- Displaying the Batch Operation Menu1027
- Batch Saving Files1027
- Batch Loading Files1028
- Batch Copying Files1029
- Importing and Exporting Files1030
- Displaying the Import/Export Menu1030
- Importing Frame Memory Data1030
- Exporting Frame Memory Data1031
- Directory Operations1033
- Displaying the Directory Menu1033
- Creating a New Directory1033
- Renaming a Directory1034
- Deleting a Directory1034
- Copying Files between Different Unit Ids1035
- Saving Files Recalled by Autoload1037
Appendix (Volume 2)1039
- Spotlighting1040
- Texture Patterns1040
- Shape Patterns1041
- Functional Differences with Models of DME1042
- Macro File Editing Rules1045
- Macro File Syntax1045
- Syntax of Event and Continue Statements1046
- File Name1047
- Saving and Recalling a File1047
- Errors1048
- Correspondence between Events and Symbols1048
- Symbols and Parameters1049
- Example of File Contents1056
- About the Macro Attachment List Display1057
- M/E and PGM/PST Banks1057
- Auxiliary Bus Control Block1060
- Other Blocks1062
- Menu Operations Not Recorded in a Menu Macro1064
- Volume 31067
Chapter 18 System Setup (System)1069
- Setup for the Whole System1070
- Network Settings (Network Config Menu)1071
- Making the Network Settings1071
- System Settings (System Config Menu)1073
- Selecting the System Operation Mode1073
- Specifying the Switcher Controlled by the Control Panel1075
- Specifying the DME Connected to the Switcher1076
- Enabling the FM Data Port of the Switcher1076
- Setting the Signal Format (Format Menu)1078
- Setting the Signal Format1078
- Switching the Input Reference Signal for HD System1080
- Setting Conversion Formats1081
- Setting the Screen Aspect Ratio (Format Menu)1084
- Selecting the State after Powering on (Start up Menu)1085
- Saving and Recalling Setup Data1086
- Selecting the State at Start-Up1087
- Saving User-Defined Settings1088
- Setting Automatic Loading of Register Data at Power on1088
- Function)1088
- Reset and Initialization (Initialize Menu)1090
- Installation and Device Setup (Install/Unit Config Menu)1091
- Installing Software1091
- Making Settings Required to Use the Software1093
- Adding User Texture Patterns1096
- Switching the Color Correction Function1104
- Inverting the Field Polarity of Frame Memory Images on the System Level1105
- Allowing MVS-8000A/MVS-8000G Files to be Used on the MVS-80001106
- Saving a Frame Memory Clip with Ancillary Data1106
- System Maintenance (Maintenance Menu)1108
- Setting the Date and Time1108
- Using a Memory Card1109
- Carrying out the Primary Setting1110
- Reloading a USB Driver1110
- Initializing the Hard Disk1110
- Locking the Setup Menu Settings1111
- Locking File Loading Operations1114
Chapter 19 Control Panel Setup (Panel)1117
- Overall Control Panel Settings (Config Menu)1118
- Panel Setup1118
- Interchanging the Bank Order or Disabling Operation1119
- Assigning Two M/E Banks to One M/E Bank1120
- Assigning the Key Delegation in the Downstream Key Control Block1121
- Linking Switcher Bus and Router Destination1122
- Linking Transitions between Keyers1125
- Linking the Next Transition Selection Buttons1126
- Assigning a Region to the Region Selection Buttons in the Numeric1126
- Keypad Control Block or Multifunction Flexi Pad Control Block1126
- Setting the Assignment of Transition Type Selection Buttons1129
- Setting VTR Operation Button Assignment1130
- Setting the Assignment of Macro Operation Buttons1132
- Assigning the Dual Background Bus Mode Switching Function1133
- Assigning the Utility/Shotbox Mode Switching Function1133
- Assigning the Function to Disable Cross-Point Button Operations to a1134
- Button1134
- Assigning the aux Bus Control Mode Switching Function1134
- Fade-To-Black Control Block1135
- Assigning Keys to the Independent Key Transition Control Block1136
- (Simple Type)1136
- Assigning Preview Output to Preview Selection Buttons1137
- Assigning Functions to the Device Control Block1138
- Inhibiting Utility 2 Bus and Key Operations1140
- Inhibiting DME Channel Selection Operations1141
- Preference Buttons1142
- Assigning Functions to the Buttons in the Multifunction Flexi Pad1143
- Control Block1143
- Assigning Operations to the Switcher Extension Interface Ports1146
- Assigning a Function to the Independent Key Transition Control Block1146
- (Simple Type)1146
- Cross-Point Settings (Xpt Assign Menu)1149
- Creating Cross-Point Assign Tables1150
- Copying Cross-Point Assign Tables1155
- Selecting Cross-Point Assign Tables1156
- Exporting Source Names and Destination Names1157
- Making Settings for Audio Mixer1158
- Assigning a Cross-Point Button to Enable/Disable Side Flags1159
- Auxiliary Bus Control Block Settings (aux Assign Menu)1160
- Assigning a Bus to an aux Delegation Button1160
- Using the Auxiliary Bus Control Block for Router Control1162
- Setting Button Assignments (Prefs/Utility Menu)1166
- Assigning Functions to User Preference Buttons1166
- Control Block1171
- Assigning a Function to the Key 2 Row Cross-Point Buttons1177
- Interfacing with External Devices (Device Interface Menu)1178
- Making Control Panel GPI Input Settings1178
- Making Control Panel GPI Output Settings1181
- Setting the Control Mode for P-Bus Devices1183
- Setting the SCU Editor Panel Port1183
- Making DCU Serial Port Settings1184
- Sharing Disk Recorder/Extended VTR File Lists1185
- Setting the aux Bus Override Operating Mode1186
- Operation Settings (Operation Menu)1187
- Setting the On-Air Tally1188
- Setting the Transition Rate Display Mode1188
- Making Settings Relating to Effects1189
- Setting the First Keyframe When a Rewind Is Executed1189
- Setting the Source and Destination Names1190
- Settings for the Flexi Pad and Wipe Snapshot Menu1191
- Setting the Button Operation Mode1191
- Setting Trackball, Joystick, Search Dial, and Double-Click Sensitivity1194
- Specifying Main Split Fader1195
- Setting the Macro Execution Mode1195
- Screen Saver and Other Settings (Maintenance Menu)1197
- Screen Saver Settings1197
- Adjusting the Brightness1197
- Adjusting the Alarms1198
- Calibrating the Touch Panel1198
- Setting the Menu to be Shown When the Menus Are Started1199
- Setting the Mouse Wheel Scrolling Direction for Parameter Setting11991199
- Selecting the Mouse Button Used for Adjusting the Knob Parameters1199
Chapter 20 Switcher Setup (Switcher)1201
- Settings for Switcher Configuration (Config Menu)1202
- Adjusting the Reference Phase1203
- Specifying the Video Switching Timing1203
- Setting the Operation Mode1203
- Setting User Regions1206
- Assigning PGM/PST Logically to an M/E1207
- Banks1207
- Setting the Side Flag Video Material and Operation1207
- Signal Input Settings (Input Menu)1210
- Making Phase Adjustment and through Mode Settings1210
- Making Video Process Settings1211
- Enabling the Illegal Color Limiter1212
- Selecting Inputs to Apply the Format Converter (When Using the MVS-8000G)1212
- Selecting the Format Converter Conversion (When Using the MVS-8000G)1213
- Signal Output Settings (Output Menu)1220
- Assigning Output Signals1220
- Setting the Reference Output1221
- Setting the Output Signal1222
- Settings Relating to Video Switching (Transition Menu)1227
- Selecting the Bank to Make the Settings1227
- Settings Relating to Keys, Wipes, Frame Memory and Color Correction (Key/Wipe/Fm/Ccr Menu)1230
- Switching Video Process Memory on or off1231
- Settings for the Show Key Function1231
- Settings for Key Auto Drop Function1231
- Automatically Naming and Saving to Frame Memory1232
- Selecting the Bank to Make the Settings1232
- Settings Relating to Function Links (Link Menu)1235
- Setting a Cross-Point Button Link1235
- Making Link Table Settings1237
- Linking Cross-Point Buttons and GPI Output Ports1237
- Making a Setting for Linking Two M/E Banks1239
- Making a Link Setting for Key Transition1241
- Interfacing with External Devices (Device Interface Menu)1243
- Making 9-Pin Port Device Interface Settings1243
- Making Switcher Processor GPI Input Settings1244
- Making Switcher Processor GPI Output Settings1247
- Enabling or Disabling aux Bus Control1249
- Setting the Interface between the DME and the Switcher1249
- Setting the aux Bus Output and Reentry Input1250
- Command1251
Chapter 21 DME Setup (DME)1253
- Settings Relating to Signal Inputs (Input Menu)1254
- Setting the Initial Crop1254
- Setting an Illegal Color Limit for Matte Signals1255
- Making DME System Phase Adjustment1255
- Setting the TBC Window Center Position1255
- Settings Relating to Signal Outputs (Output Menu)1257
- Adjusting the DME1 and DME2 Output Video Clip Levels1257
- Setting the Monitor Output1258
- Interfacing with External Devices (Device Interface Menu)1259
- Making DME GPI Input Settings1260
- Making DME GPI Output Settings1262
Chapter 22 DCU Setup (DCU)1263
- Setup Relating to DCU1264
- Settings Relating to Parallel Inputs (Input Config Menu)1265
- Assigning a GPI Input Port1265
- Releasing the Assignment of a GPI Input Port1266
- GPI Input Setting (GPI Input Assign Menu)1267
- Making DCU GPI Input Settings1267
- Parallel Output Settings (Output Config Menu)1271
- Assigning a GPI Output Port1271
- Releasing the Assignment of a GPI Output Port1272
- GPI Output Setting (GPI Output Assign Menu)1273
- Making DCU GPI Output Settings1273
- Serial Port Settings (Serial Port Assign Menu)1276
- Making Serial Port Settings1276
- Port1278
- Router Interface Settings (Router Menu)1288
- Assigning Switcher Inputs and Outputs to S-Bus Space1288
- Making an External Box Setting1289
- Tally Group Settings (Group Tally Menu)1292
- Wiring Settings (Wiring Menu)1293
- Making New Wiring Settings1293
- Changing the Wiring Settings1294
- Deleting Wiring Settings1294
- Sorting Wiring Settings1294
- Tally Generation Settings (Tally Enable Menu)1296
- Making New Tally Generation Settings1296
- Modifying Tally Generation1297
- Deleting Tally Generation Settings1297
- Tally Copy Settings (Tally Copy Menu)1299
- Making New Tally Copy Settings1299
- Modifying Tally Copy Settings1300
- Deleting Tally Copy Settings1300
- Parallel Tally Settings (Parallel Tally Menu)1301
- Making or Modifying Parallel Tally Settings1301
- Deleting Parallel Tally Settings1302
- Serial Tally Settings (Serial Tally Menu)1303
- Setting or Changing the Serial Tally Settings1303
- Making the Serial Tally Source Address Settings1303
- Clearing a Source Address Setting1304
- Procedure for Simple Connection1306
- Setting Status of the MKS-8080/8082 in Simple Connection1308
Chapter 25 DIAGNOSIS1309
- Checking the Communications Status1310
- Communications Status Display1310
Appendix (Volume 3)1313
- Data Saved by [Setup Define] and [Initial Status Define]1314
- Data Saved by [Setup Define]1314
- Data Saved by [Initial Status Define]1319
- Error Messages1323
- Error Messages Displayed in the Error Status/Error Log Menu1323
- Error Messages Appearing in a Message Box1327
- Error Messages Shown in the Error Information Menu1350
- Index1352

Brand	Sony
Model	MVS-8000
Category	Switch
Language	English

Sony MVS-8000 User Manual

Table of Contents

Questions and Answers:

Sony MVS-8000 Specifications

Related product manuals