EasyManuals Logo

Sony MVS-8000 User Manual

Sony MVS-8000
1364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #129 background imageLoading...
Page #129 background image
Chapter 2 Menus and Control Panel
129
Basic Menu Operations
Lit pale blue: The function is enabled, and
the parameters can currently be
adjusted with the knobs.
Lit orange: The function is enabled.
Lit purple: Execution button. Pressing the
button immediately executes the
function. (Example: [Auto Start]
button in the Chroma Adjust menu)
Pressing a button of this type displays a
further menu, allowing more detailed
settings. (Example: [Chroma Adjust]
button in the Type menu)
Setting parameters
This marking on a function button indicates
that there are parameters which can be
adjusted with the knobs.
Pressing this function button assigns
parameters to the knobs.
You can set the parameter values by either
of the following methods.
• Turn the knob (1 to 5) corresponding to
the parameter, to adjust the value.
• Press the knob parameter buttons (1 to 5)
corresponding to the parameter. This
displays the numeric keypad window
allowing you to enter the desired value.
In the description of specific setting
procedures, the knob adjustment is
described, as follows.
Example: When wipe pattern key is selected
When the [MENU] button in the device
control block is lit, you can use the trackball
and Z-ring to control the parameters.
• Move the trackball on the x-axis to
control the parameter for knob 1 or on the
y-axis to control the parameter for knob
2. Moving up or to the right increases the
parameter value, and moving down or to
the left decreases the parameter value.
• Use the Z-ring to adjust the parameter for
knob 3. Turning clockwise increases the
parameter value, and turning
counterclockwise decreases the
parameter value.
Going back to the previous menu
To return to the last displayed menu, press
the previous page button.
Returning to default state in function
groupings
1
Press the [Default Recall] button,
turning it on.
This enters the menu default recall
mode.
2
Press the VF button you want to return
to the default state.
mark
Knob Parameter Adjustment Setting values
1 Size Pattern size 0.00 to 100.00
2 Soft Edge softness 0.00 to 100.00
3 Density Key density 0.00 to 100.00

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony MVS-8000 and is the answer not in the manual?

Sony MVS-8000 Specifications

General IconGeneral
BrandSony
ModelMVS-8000
CategorySwitch
LanguageEnglish

Related product manuals