Appendix (Volume 3)
1318
Data Saved by [Setup Define] and [Initial Status Define]
a) Only when using the MVE-9000 and MVE-8000A SDI interface
b) Only when using the MVE-8000A/9000 SDI interface
Included in
Switcher
Setup
7326.2 Engineering Setup >Panel
>Operation >Effect Mode
Setting of [Default KF Duration]
for switcher keyframes
3221 Misc >Safe Title All data relating to Safe Title
menu
Included in
DME Setup
7341 Engineering Setup >DME >Input All data relating to Input menu
7341.1 Engineering Setup >DME >Input
>TBC Center
All data relating to TBC Center
menu
b)
7343 Engineering Setup >DME
>Output
Video clip level adjustment values
for DME1 and DME2 outputs
b)
7343.1 Engineering Setup >DME
>Output >Monitor Output
All data relating to Monitor Output
menu
a)
7344 Engineering Setup >DME
>Device Interface
All data relating to Device
Interface menu
7344.1 Engineering Setup >DME
>Device Interface >DME1 GPI
Input
All data relating to DME1 GPI
Input menu
7344.3 Engineering Setup >DME
>Device Interface >DME1 GPI
Output
All settings relating to DME1 GPI
Output menu
7344.4 Engineering Setup >DME
>Device Interface >DME2 GPI
Input
All settings relating to DME2 GPI
Input menu
7344.6 Engineering Setup >DME
>Device Interface >DME2 GPI
Output
All settings relating to DME2 GPI
Output menu
7326.2 Engineering Setup >Panel
>Operation >Effect Mode
• Settings relating to [Default KF
Duration] for DME keyframes
• Setting data for [Effect Auto
Save] button
Type Menu number Menu path Saved data
To Next Page
Loading...
Need help?
General