Sony MVS-8000 User Manual

Chapter 2 Menus and Control Panel
68
Names and Functions of Parts of the Control Panel
a Mode selection buttons
WIPE: To save or recall a wipe snapshot,
or recall the pattern number of a wipe
pattern, use this in combination with
the buttons of the memory recall
section.
DME: To save or recall a DME wipe
snapshot, or recall the pattern number
of a DME wipe pattern, use this in
combination with the buttons of the
memory recall section.
SNAPSHOT: To save or recall a snapshot,
use this in combination with the
buttons of the memory recall section.
EFF (effect): To recall the master timeline
or run an effect, use this in combination
with the buttons in the memory recall
section.
SHOTBOX: To recall or execute a
shotbox, use this in combination with
the buttons of the memory recall
section.
MCRO (macro): To save, recall or edit a
macro, use this in combination with the
buttons of the memory recall section.
TRANS RATE (transition rate): To enter
the transition rate, press this button,
turning it on. To enter the independent
key transition rate, hold down this
button, and press the key delegation
button in the independent key
transition control block. To select
whether the value is entered in frames
or as a timecode value, switch the [TC]
button in the memory recall section on
or off.
1 Mode selection buttons
5 XPT HOLD status display
3 Memory recall section
2 Bank selection buttons
4 UNDO button
6 Numeric display

Sony MVS-8000 Specifications

General

Brand	Sony
Model	MVS-8000
Category	Switch
Language	English