Dell PowerConnect PC5524 User Manual

116 Clock Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Clock.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Default Configuration
The SNTP anycast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
The polling time is configured with the sntp client poll timer Global
Configuration mode command.
Use the sntp client enable Interface Configuration mode command to enable
the SNTP client on a specific interface.
Example
The following example enables SNTP anycast clients.
Console(config)# sntp anycast client enable
sntp client enable
The sntp client enable Global Configuration mode command enables the
Simple Network Time Protocol (SNTP) broadcast and anycast client on an
interface. Use the no form of this command to disable the SNTP client.
Syntax
sntp client enable { interface-id }
no sntp client enable {
interface-id }
Parameters
interface-id—Specifies an interface ID, which can be one of the following
types: Ethernet port, Port-channel or VLAN.
Default Configuration
The SNTP client is disabled on an interface.
Command Mode
Global Configuration mode

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English